<dd id="bis4i"></dd>

  • <nav id="bis4i"><listing id="bis4i"></listing></nav>
  • <big id="bis4i"></big>
  • <nav id="bis4i"></nav>

      <nav id="bis4i"><optgroup id="bis4i"></optgroup></nav><dd id="bis4i"></dd>
      Microchip logo
      • All
      • Products
      • Documents
      • Applications Notes
      product primary image

      ZL30793

      Status: In Production

      View More
      Overview
      Documents
      Development Environment
      RoHS Information
      Add To Cart

      Device Overview

      Summary

      The ZL30793 offers three independent timing channels of a combined hardware and software platform including IEEE 1588-2008 Precision Time Protocol Stack and Synchronization Algorithms. Using Microsemi’s miTimePLL timing technology, this device offers new and improved features for 5G transport and wireless infrastructure equipment. This devices is ideal for timing card applications in systems that need to support 10G/40G and 100G Phys.

      Click here for secure documentation

      Under the same family, the ZL3066x and ZL3069x offer one to three channels of Synchronous Ethernet (SyncE) packet clock synchronization for line card and timing card interface.

      Additional Features
      • Three independent DPLL channels
      • Precise phase/frequency measurement and tuning lower system latency to meet 4G LTE, 5G & Wireless Infrastructure
      • Ultra-fast lock to GPS/GNSS and 1PPS for faster power-up time for 4G LTE, 5G & Wireless Infrastructure
      • Precise chip-to-chip time interfaces use less backplane traces for 1PPS distribution for chassis systems
      • Split oscillator option lowers cost, lowers jitter, and provides redundancy
      • SyncE assist for high-accuracy IEEE 1588 provide lower cost end applications to assist IEEE1588 for time
      • Sophisticated packet clock recovery algorithms are field proven and most widely deployed by Carriers
      • Fully compliant to EEC (G.8262), SEC (G.813), GR-253 SMC and GR-1244 Stratum 3/3E
      • Excellent jitter performance of <300 fs RMS in the 12 kHz to 20 MHz band meets jitter requirements for 10G/40G and 100G PHYs
      • Two programmable ultra-low jitter synthesizers generate any frequency from 0.5 Hz to 1045 MHz
      • One programmable general purpose synthesizer generates any clock from 0.5 Hz to 180 MHz
      • 8 differential or 16 single ended ultra-low jitter outputs plus two general purpose CMOS outputs
      • Programmable output advancement/delay to accommodate trace delays or compensate for system routing paths
      • Up to three programmable digital PLLs/NCOs with loop bandwidth from 0.1 mHz to 470 Hz synchronize to any clock rate from 0.5 Hz to 900 MHz
      • Accepts up to 10 differential or 10 single ended input references
      • Full reference monitoring of electrical failures
      • Automatic hitless reference switching and digital holdover on reference fail with initial holdover accuracy better than 0.1 ppb
      • Any input reference can be fed with clock, sync (frame pulse), clock /sync pair or clock modulated with sync pulse (embedded PPS ePPS and embedded PP2S ePP2S)
      • Easy Configuration and dynamic programming via SPI/I2C interface
      • Factory programming available
      • Operates from a single crystal resonator or clock oscillator
      • Applications/Uses
        • Central timing function for carrier network equipment compliant to ITU-T G.8262, G.8273.2, G.8273.4
        • Communications systems timed by any combination of Synchronous Ethernet, IEEE 1588 PTP, or GPS/GNSS
        • 5G wireless CU, DU, and RU systems
        • 5G systems with precise time requirements driven by advanced services such as carrier aggregation, coordinated multipoint, OTDOA location, etc.
        • Integrated basestation reference clock for 2G through 5G macro and micro cells
        • Carrier routers, access aggregation, wireless backhaul
        • SONET/SDH systems
      Parametrics
      Name
      Value
      Type
      IEEE1588
      DPLLs
      3 or (3 NCO)
      BW (Hz)
      0.1m-470
      Inputs
      10D/10SE
      Input Frequency
      0.5 Hz–900 MHz
      Embedded PPS and EPP2S
      Y
      Diff. Outputs
      8
      CMOS Outputs
      16 + 2
      Output Frequency
      0.5 Hz–1045 MHz
      Low-Jitter APLLs
      2
      GP Clock Gen
      1
      Jitter (psRMS)
      0.19

      Documents

      Jump to:

      Brochures

      Product Brief


      Development tools data is currently unavailable.

      RoHS Information

      Part Number
      Device Weight (g)
      Shipping Weight (grams)
      Lead Count
      Package Type
      Package Width
      Solder Composition
      JEDEC Indicator
      RoHS
      China EFUP
      ZL30793
      0.195600
      1.613636
      80
      VFLGA
      11x11x1mm
      NiAu
      e4
      ZL30793LFG7
      0.195600
      1.613636
      80
      VFLGA
      11x11x1mm
      NiAu
      e4
      To see a complete listing of RoHS data for this device, please Click here
      Shipping Weight = Device Weight + Packing Material weight. Please contact sales office if device weight is not available.

      Buy from Microchip

      Grid
      View
      Table
      View
      Filter:
      Apply
      Clear
      Only show products with samples
      Product
      Leads
      Package Type
      Temp Range
      Packing Media
      5K Pricing
      Buy
      ofozy99国产